because well end up with a large decimal, well leave it as sqrt of 6.75

where is the position of angle 60 degrees in your diagram

Need the diagram !

because well end up with a large decimal, well leave it as sqrt of 6.75

a^2=b^2 c^2 -2bcCosA

a^2=(3)^2 (3)^2 -2(3)(3)Cos60

a^2=18 -18(0.5)

a^2=9

so your area is approximately 7.79units squared.

so your area is approximately 7.79units squared.

now we use our triangle formula to find the area of the top of the diamond.

element of parallelogram or rectangle or sq. or rhombus = base * height element of circle = pi * r^2 element of triangle = a million/2 * base * height element of t zoid = height * favourite base length element of a familiar hexagon = 3 * sqrt(3) / 2 * s^2, the place s = factor length section for sector of a circle = pi * r^2 * (perspective/360)

so your area is approximately 7.79units squared.

a^2 b^2 = c^2

(1.5)^2 b^2 = (3)^2

b^2 = 6.75

we draw a vertical line from the middle of the horizontal line to the tip of the diamond.

a=3 so you know the horizontal line has a length of 3.

because well end up with a large decimal, well leave it as sqrt of 6.75

element of parallelogram or rectangle or sq. or rhombus = base * height element of circle = pi * r^2 element of triangle = a million/2 * base * height element of t zoid = height * favourite base length element of a familiar hexagon = 3 * sqrt(3) / 2 * s^2, the place s = factor length section for sector of a circle = pi * r^2 * (perspective/360)

(base times height)/2 but since we have two identical triangles (one at the top, one at the bottom, we can multiply by two leaving us just base times height.

now we use our triangle formula to find the area of the top of the diamond.

This post is last updated on hrtanswers.com at Date : 1st of September – 2022